Please carefully review the program requirements and instructional materials for information on how to apply for the Landscape Transformation Program.
- To receive a reservation for a landscape transformation rebate, you must have existing turf. If your project has already been started or completed, you are not eligible for a rebate.
- Not all Southern California water agencies participate in this program and rebates are not available in every participating city or water agency. Check with your local city or water agency, or verify participation by visiting estimate my rebate.
- All landscape transformation projects must be within the Metropolitan Water District’s service area in order to qualify for rebate.
- Before you begin your project or remove any turf, you must apply for and receive an approval to proceed, which is a reservation of funds.
- If you begin or complete your project prior to receiving a reservation, you are not eligible for a rebate.
- The project area eligible for a rebate is defined as the area with existing turf to be removed and where the required program features will be installed. Plants and other required elements which are installed outside of the project area will not count towards the program requirements.
To Claim a Rebate (if all of the above conditions have been met), your completed project must:
- Have a minimum of 250 square feet of turf removed, or if the entire front yard has less than 250 square feet of turf grass, all present turf must be removed.
- For residential projects, the front yard area must be converted first in order to convert a backyard, side yard, or parkway. Back yard and/or side yard conversions must be done in conjunction with a front yard conversion or photos must be submitted showing that the front yard was previously transformed. The 250 square feet minimum conversion must be completed in the front yard or all turf must be removed if the front yard area is less than 250 square feet.
- Not include any live turf, or turf-looking grasses.
- Include at least five plants per 100 square feet in the project area. Please visit bewaterwise.com to view detailed photo guides of 50 plants native to Southern California. For native plants specific to your area, visit calscape.org
- Please note that turf, turf-looking grasses, or invasive plants do not qualify even if they are drought-tolerant or California natives. You can view a list of invasive plants by visiting http://www.cal-ipc.org/solutions/prevention/landscaping/dpp/?region=socal
- Be permeable to air and water to reduce surface area runoff. Areas with concrete, structures or other surfaces that air and water cannot move through will be disqualified.
- Note: Turf areas replaced with structures or any impermeable surfaces will not be eligible for a rebate. Exclude these turf areas from your measurements to avoid program disqualification and processing delays. Some examples of built structures include: raised patios, decks and garages.
- Pathways with broken concrete (spaced concrete), flagstone or other like materials may be used, but cannot be grouted with cement or concrete. Approved filler typically used for these materials is loose sand.
- Include a stormwater feature designed to capture rainfall through infiltration or on-site storage for reuse. Eligible techniques can include: rain gardens, rock gardens, dry river beds, swales, berms, grades, rain barrels and cisterns. Please visit the Sustainable Approach page for more information.
- In order for the rain barrel/cistern to qualify as a rainwater capture feature, the property must have existing gutters around the full perimeter of the roof and existing downspouts for adequate water collection.
- Installed rain barrels/cisterns must meet all local and regional requirements and be connected properly to installed rain gutters and downspouts. Rain barrels/cisterns must be installed in, and drain to, the project area.
- Include three (3) inches depth of organic mulch surrounding all plants. Acceptable forms of organic mulch include shredded bark, bark nuggets or wood chips.
- Mulch, rock or decomposed granite must cover any bare spaces within the project area (no bare soil allowed). The use of organic material is recommended.
- Include irrigation modification or conversion; this is required for all projects:
- Convert over-head sprays to drip, micro-spray, bubblers, or rotating nozzles; whichever is applicable; or
- Cap sprinkler heads or remove irrigation equipment and hand-water
- No overhead spray sprinklers are allowed in the completed project
- No synthetic turf is allowed
- Consumers are responsible for complying with all applicable laws, codes, policies, covenants, conditions and restrictions.